https://www.trikonmachine.in Latest Products Thu, 21 May 2026 20:23:11 +0530 en-us https://www.trikonmachine.in https://www.trikonmachine.in/hose-pipes.htm https://www.trikonmachine.in/hose-pipes.htm Thu, 24 Jun 2021 00:00:00 +0530 https://www.trikonmachine.in/concrete-pump-hose.htm https://www.trikonmachine.in/concrete-pump-hose.htm Tue, 13 Jul 2021 00:00:00 +0530 APPLICATIONS -  High-pressure concrete pump hose for boom transfer, placement. Pneumatic discharge of cement and minerals. Pumping of slurry and drilling mud (not oil-laden). Grouting of mortar, cement, or concrete.   ADVANTAGES Very high resistance of the hose gives extended service life. Flexible, easy to handle. Robust construction to withstand heavy compressive loads and guarantee maximum safety. Construction eliminates kinking and allows easy cleaning by reverse pumping. Safety factor 2:1.   Swaged couplings with dimensions according to VICTAULIC or concrete pump manufacturers (PUTZMEISTER, SCHWING, etc.). https://www.trikonmachine.in/spares-for-shotcrete-spraying-equipment.htm https://www.trikonmachine.in/spares-for-shotcrete-spraying-equipment.htm Thu, 08 Jul 2021 00:00:00 +0530 https://www.trikonmachine.in/cement-hose.htm https://www.trikonmachine.in/cement-hose.htm Tue, 13 Jul 2021 00:00:00 +0530 https://www.trikonmachine.in/spares-for-batch-mix-asphalt-and-concrete-plants.htm https://www.trikonmachine.in/spares-for-batch-mix-asphalt-and-concrete-plants.htm Wed, 14 Jul 2021 00:00:00 +0530 Types : Bottom Wear Plates Sequence Controllers Temp. Controller & Sensor Hanger Bearings Strippers Main Burner Fuel Pump Filter Bags/Cam Profiles Pneumatic Cylinder Double Horn Shovels Boiler Circulation Pumps Solenoid Valve/Coils Electrodes/Photo Cells   REPLACEMENT PARTS SUITABLE FOR LINTEC, LINNHOFF ASPHALT PLANTS & SCHWING, GREAVES, SIMEM CONCRETE PLANTS https://www.trikonmachine.in/rock-bolts-anchor-bolts.htm https://www.trikonmachine.in/rock-bolts-anchor-bolts.htm Wed, 14 Jul 2021 00:00:00 +0530 TMPL manufactures mechanical Rock Bolts of sizes 16 mm to 36 mm dia in various lengths, for use in mines, tunnels and embankments as rock anchors.    Rock bolt is a stressed or tensioned reinforcement element consisting of a rod, mechanical or grouted anchorage and a plate and nut for stressing by providing torque to the nut or for retaining tension applied bydirect pull. It is also known as active rock anchor. Rock bolts are produced from TMT Fe SOO grade ribbed steel bar as per IS:8266-1986 specifications in various types as below.    Expansion Shell Type : These bolts use expansion shells and plugs made of cast steel with left hand thread, firmly gripping the rock and the bolt forming anchorage.    Resin/Cement Grouted Type : These anchors are machined conically at one end and are threaded on the other. The conically tapered end is pushed into the resin/cement cartridge placed at the bottom of the drill hole.    Rock Bolts Spares and Accessories : Heavy Duty 2H Hex Nuts, Bevel Washers, Taper Washers, Hardened Plum Washers, Beanng Plates etc.    https://www.trikonmachine.in/boomer-and-tamrock-replacement-parts.htm https://www.trikonmachine.in/boomer-and-tamrock-replacement-parts.htm Tue, 13 Jul 2021 00:00:00 +0530 We deal in replacements parts including consumables suitable for use in:  Rock drill, Feed & Drifter Oil/Air /Water filters  HLX 5 & HL 500 Drifter Spares COP 1238 ME / SE Atlas Copco parts or consumable items like slide bars, slide piece, centralizers.    We keep in stock major items like Pull Rope, Return Rope, Bushing, Springs, Slide Holder, Driver, Hose Drum, Pulley etc.    We also produce the complete range of hydraulic hose assemblies for these drilling machines along with the connectors and end fittings.    REPLACEMENT SPARES SUITABLE FOR BOOMER / TAMROCK DRILLING RIGS https://www.trikonmachine.in/conveyor-belts-rollers-accessories.htm https://www.trikonmachine.in/conveyor-belts-rollers-accessories.htm Tue, 13 Jul 2021 00:00:00 +0530 We supply rubber conveyor belting for use in material handling in various industries. Our belts are produced as per IS 1891:1994, DIN 52516 standards, Our range includes  General-purpose M24, N17 grade belts with abrasion-resistant cover  Heat resistant belts for temp up to 180'C  Fire-resistant belts with antistatic properties as per CSA, DIN, AS, and GOST standards  Oil resistant belts Chemical resistant belts for corrosive conditions  Hygienic belts for food industry  Chevron belts for high inclination conveying    Special Abrasion Resistant Belts for use in tough and challenging conditions are also made for the aggregate industry.    We also sell accessories for conveying systems such as Impact and Carrying Rollers, Brackets, Pulleys and Skirting material.  https://www.trikonmachine.in/screen-wire-meshes.htm https://www.trikonmachine.in/screen-wire-meshes.htm Tue, 13 Jul 2021 00:00:00 +0530 We produce wire meshes for use in a variety of screening equipment. Wires of spring steel as per IS 4454: 1981 Part 1 are used to make these meshes. These high carbon wires have abrasion and distortion-resistant properties required for optimum life of the screens.    The mesh can be provided unclamped and with either 'C' type or 'S' type clamping on ends depending upon the types on screens in which they are used.  Screen clamping plates  Clamping bolts  Rubber support  https://www.trikonmachine.in/stone-crusher-spares.htm https://www.trikonmachine.in/stone-crusher-spares.htm Tue, 13 Jul 2021 00:00:00 +0530 We produce spares and wear parts for most of the commonly used crushing equipment. Our range of products includes High Manganese and High Carbon High Chrome (HiC HiCr) alloy castings for wear parts. We also deal in centrifugally cast bronze alloy for critical spares like Eccentric/Frame Bushings and Thrust Bearings.    REPLACEMENT PARTS SUITABLE FOR METSO, NORDBERG, SANDVIK, PUZZOLANA, NAWA, TEREX PEGSON, FINLAY, LORO PARISINI, KEUKEN, ECOMAN, EXTEC, PARKER, L&T, BERGEAUD AND OTHERS https://www.trikonmachine.in/grouting-packers.htm https://www.trikonmachine.in/grouting-packers.htm Tue, 13 Jul 2021 00:00:00 +0530 Applications : "Tube a manchettes" grouting Hydraulic fracture testing I Bore-hole fluid sampling Permeability testing Aquifers monitoring Water wells repair Water Proofing Rock grouting  Exclusice distributors in India of GEOPRO - www.geopro.be https://www.trikonmachine.in/grooved-pipes-accessories.htm https://www.trikonmachine.in/grooved-pipes-accessories.htm Tue, 13 Jul 2021 00:00:00 +0530 Victaulic type Grooved Pipes are made out of ERW black steel pipes conforming to 1S:1239 or seamless pipes as per ASTM 106 Gr B depending on the requirement of the job.    The pipes have collared grooved ends, which allow minor adjustment and deflection in the straight pipeline, on account of undulating surfaces and/or misalignment in the direction Cut the groove for heavy-duty and thick-wall pipes.  Collar welded/roll groove for light-duty and thin-wall pipes.    CLAMPS &SEALS: The clamps are of SG Iron casting with 2 bolt design for quick fixing with a rubber sealing to give a leak-proof joint. We Fallow "Style 77" In our Clamp design. https://www.trikonmachine.in/wear-plates-for-dry-wet-shotcrete-equipment.htm https://www.trikonmachine.in/wear-plates-for-dry-wet-shotcrete-equipment.htm Tue, 13 Jul 2021 00:00:00 +0530 REPLACEMENT PARTS SUITABLE FOR SCHWING, MEYCO POTENZA/ROBOJET, CIFA, ALIVA, GIA, NORMET SHOTCRETE EQUIPMENT https://www.trikonmachine.in/spraying-arm-accessories.htm https://www.trikonmachine.in/spraying-arm-accessories.htm Sun, 12 Oct 2025 00:00:00 +0530 REPLACEMENT PARTS SUITABLE FOR SCHWING, MEYCO POTENZA/ROBOJET, CIFA, ALIVA, GIA, NORMET SHOTCRETE EQUIPMENT https://www.trikonmachine.in/concrete-pump-spares.htm https://www.trikonmachine.in/concrete-pump-spares.htm Tue, 13 Jul 2021 00:00:00 +0530 We produce spares and wear replacernent parts suitable for commonly used concrete and shotcrete pumps. Delivery lines a. accessories are made up of wear and abrasion resistant seamless pipes/forgings which are perfect for tough and demanding working conditions.    Some parts are made in high manganese castings for optimum wOrking life and mirnmum breakdown. Special alloy steel parts with TC Inserts are used for pumping unit parts which have to endure very high abrasion. We specialise in pumping unit parts and delivery lines for these machines.    REPLACEMENT PARTS SUITABLE FOR PUTZMEISTER, SCHWING, CIFA, GREAVES, AQUARIUS, SANY AND OTHERS https://www.trikonmachine.in/hydraulic-hose.htm https://www.trikonmachine.in/hydraulic-hose.htm Tue, 13 Jul 2021 00:00:00 +0530 TMPL is a channel partner of Semperit group for their range of hydraulic hoses. Our hydraulic hoses are generally suitable for mineral and synthetic oil-based hydraulic fluids (HL, HLP, HLPD, HVLP), for oil-water emulsions (HFAE, HFAS, HFB), and for water glycol solutions (HFC), as well as for vegetable and mineral oil-based lubricants. In individual cases, there may be use restrictions due to manufacturer-specific oil additives.   Hose types One Wire Braid Hydraulic Hoses Two-Wire Braid Hydraulic Hoses Multispiral Hydraulic Hoses